2012 Jeep Unlimited Rubicon with Warn Bumper Base Plate Kit Recommendation
Question:
I have a Falcon 5250 tow bar. I want to tow my 2012 Jeep Wrangler Rubicon Unlimited. I have a Warn front bumper with Warn winch. What base plate do I need? What are my options for lights? Which option do you recommend for lights?
asked by: Ron O
Expert Reply:
The correct Roadmaster base plate kit to use on your 2012 Jeep Wrangler Unlimited with the Warn front bumper is the Roadmaster kit part # 1430-1 which is a confirmed fit.
This would work great with your Falcon part # RM-520. If you need safety cables you would want the part # RM-643 which are coiled to keep them easily off the ground.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Standard
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Hitch Pin Attachment
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Parts Needed to Tow a 2012 Jeep Wrangler with Rock Crawler Bumper Behind a Motor Home
- Q&A: Will Roadmaster StowMaster Tow Bar Fit with Aftermarket Bumper on 2008 Jeep Wrangler
- Article: Base Plate Adapter Table
- Article: Flat Towing Package for 2016-2018 Chevrolet Silverado 1500
- Q&A: Fuse Location for 12-Volt Accessory Feed to 7-Way Trailer Connector on 2005 Chevy Silverado
- Q&A: Installing The Brake Buddy Stealth Brake Controller In Your Motorhome
- Q&A: Why Does My Blue Ox Ascent Tow Bar Need To Be Level
- Q&A: Can a Jeep Wrangler be Flat Towed by the Front Bumper
- Q&A: How To Use A Blue Ox Tow Bar With A Roadmaster Base Plate Kit On A 2012 Jeep Wrangler Unlimited
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Flat Towing Package for 1998-2006 Jeep Wrangler
- Article: Determining Trailer Tongue Weight
- Article: 5 Things to Know About Weight Distribution Hitches