Replacement Slipper Springs for a 2,100 lb Trailer
Question:
My boat trailer currently has 2inch axle with a 4 leaf slipper spring 1 3/4inch wide that needs replaced. This is my first time replacing them so I want to make sure I get all the right parts. After measuring, the SP-040275 looks like it is a match. Will the CE23103 u-bolt kit be the right choice or do I need to use the SP01-160 u-bolts with the 117594 plate. If I use the latter, do the u-bolts need lock washers? As another note, my trailer rating is only for 2100lbs. Is this spring overkill for the job or is it best to replace what has been used to ensure everything fits back together nicely with the fenders/tires? Thanks in advanced for the help!
asked by: Thomas M
Expert Reply:
The most important factor in picking out a new leaf spring for a trailer is to match the capacity needed. Going with a 3,500 lb spring for a 2,100 lb trailer is going to give you a very harsh ride.
For a spring similar to the # WIG4 that is better rated for your trailer we have the # SP-039275 which is for a 3,000 lb axle or part # e29SR for a 2,000 lb axle. If you need all 2,100 lbs of your trailer's capacity you would have to go with the # SP-039275.
If you have a 2 inch square axle like it sounds like you do the part # CE23103 would be the u-bolt kit you would want. This comes with lock washers.
Products Referenced in This Question
CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Trailer Suspension Parts
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 3500 lbs
- Square Axle - 2 Inch
- 1/2 Inch Diameter
- 4-1/2 Inch Long
- CE Smith
more information >
2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- Flat End
- 1800 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 30 Inch Long
- Painted
- etrailer
more information >
4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- Flat End
- 3700 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 30 Inch Long
- Universal Group
more information >
Product Page this Question was Asked From
CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Trailer Suspension Parts
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 3500 lbs
- Square Axle - 2 Inch
- 1/2 Inch Diameter
- 4-1/2 Inch Long
- CE Smith
more information >
Continue Researching
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Video: Review of etrailer 4 Leaf Slipper Spring - e89SR
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Video: Review of ABS Fasteners 1-3/4 Castle Nut Cotter Pin - 165649
- Video: Review of etrailer 2 Leaf Slipper Spring - e29SR
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Search Results: ring
- Search Results: slipper spring
- Shop: 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Q&A: Replacement Slipper Springs 30 Inches From Center Of Spring Eye To End Of Spring
- Q&A: Determining Correct Replacement Slipper Springs For 1982 TeeNee Trailer
- Q&A: 1-3/4 Inch Slipper Spring That is 30 Inches Long and Over 2,500 lb Capacity
- Q&A: Will 3-Leaf Slipper Spring for 2,900-lb Trailer Axles Work On a 2,200 Lb Axle
- Q&A: Replacement Slipper Leaf Spring for Triton PWC Trailer
- Q&A: Is Leaf Spring Capacity Rating for One Side or Two
- Search Results: leaf spring bushings
- Search Results: bus bar
- Search Results: trailer leaf spring
- Search Results: rg06~050
- Search Results: cotter pin
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Q&A: Replacement 30 inch Slipper Spring for PWC Trailer with 1,550 GVWR
- Video: etrailer Radius End 4-Leaf Slipper Spring Installation
- Shop: Suspension Enhancement