Compatibility of Tie Down Model 60 Brake Actuator with Kodiak K2HR35D Disc Brake Kit
Question:
The Tie Down calipers are seized and I would like to change to Kodiak. Can I still use the Tie Down model 60 actuator. I cannot find the psi rating of that unit anywhere. Thanks!
asked by: Johan
Helpful Expert Reply:
As long as your current actuator is compatible with disc brakes, it should work just fine with the Kodiak # K2HR35D disc brake kit you mentioned. Disc brakes usually operate around 1000 psi, while disc operate around 1600 psi.
The hub/rotors included with the # K2HR35D disc brake kit are compatible with a 3500 lb axle whose spindles are compatible with a # L68149 inner and # L44949 outer bearing and a 10-19 grease seal, part # RG06-050.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Continue Researching
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How to Bleed Electric Over Hydraulic Trailer Brakes
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Magnetek Series 6300A Model 6332 Replacement Converter
- Q&A: Do Trailer Tires and Wheels Need to be Balanced
- Q&A: Replacement Recommendation for TDE 46210 Hub
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Cover for a Lance Truck Bed Camper Model 1010
- Q&A: Will the Demco Brake Actuator # DM8202022 Work with Disc Brakes on a Boat Trailer
- Q&A: Required Bolt Length for Installing A-Frame Trailer Jack
- Article: Where to Position the Trailer Axle?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision