Dimensions, Mounting Pattern and Strap for Fulton F2 Fully Enclosed Trailer Winch # FW20000301
Question:
What are the dimensions for the FW20000301 unit L x W x H? Can you post the specs for the industry standard mounting pattern? Just to clarify, when this winch is using the controlled unload, is it operating similar to a worm-gear winch or brake winch? Does it come with a 2 x 20 strap or is it separate? Thanks.
asked by: Randy
Expert Reply:
The Fulton F2 Fully Enclosed Trailer Winch with Adjustable Handle, # FW20000301, measures 10 inches long, 8 inches high, and 8 inches wide with the hand on. The base is 3-1/2 inches by 6-1/8 inches.
The industry standard mounting pattern is basically a triangle-shaped bolt pattern. The two bolts at the bottom are 2-1/4 inches apart on center. The top bolt is 4-1/2 inches from either bottom bolt on center.
This winch does not function like a worm gear or brake winch. If you want to try to have some control unloading/loading, you will have to stop turning the handle, hold it there, and then manually turn the pawl knob to the opposite setting.
The winch does come with a 2 inch by 20 foot strap with a 2,000 pound capacity.
Product Page this Question was Asked From
Fulton F2 Fully Enclosed Trailer Winch with Adjustable Handle - 2,000 lbs
- Trailer Winch
- Standard Hand Winch
- Boat Trailer Winch
- Utility Winch
- Heavy Duty
- Standard Hand Crank
- Single Speed Winch
- Polyester Strap
- Fulton
more information >
Continue Researching
- Q&A: Comparing Fulton F2 and XLT Winches
- Q&A: Replacement for Knott 6S5810.001 AutoFlex 2500 lb 2-Speed Trailer Winch
- Q&A: Recommended Replacement for Fulton XLT1401 Trailer Winch
- Q&A: Installing Side Trailer Lights to Blink with Corresponding Turn Signal
- Article: Trailer Wiring Diagrams
- Q&A: Best Replacement for Atwood 82543 Brake Actuator
- Q&A: What is the Mounting Pattern for Fulton F2 2K Winch
- Q&A: How Does Manual Lockout of Titan Brake Actuator part # T63FR Work