Fit and Compatibility of Alumistinger Ball Mount and Recommended Ball for Chevrolet Silverado 1500
Question:
Will this hitch= Alumistinger Ball Mount with 2inch Drop or 1inch Rise - 8,000 lbs GTW Be able to handle a 5000 LB Boat plus gear might purchase larger boat soon attached to a New Chevy Silverado 1500 I would like to travel a few hundred miles at a time maybe even more. If not please recommend one for the job. Also a ball that will work fine together. Thanks in advance.
asked by: Mark
Helpful Expert Reply:
The Andersen Aluminstinger # AM3503 has a towing capacity of 8,000lbs and a tongue weight capacity of 800lbs. If your boat trailer and cargo are below this weight then the Andersen Alumistinger Ball Mount will perform great.
Typically tongue weight is 10-15% of the trailer, so for your 5,000lb boat would be anywhere from 500-750lbs. If you are planning on upgrading your boat then I would recommend a higher capacity ball mount like the Draw-Tite # 4280. This ball mount also has the 1 inch rise and 2 inch drop and is rated for 12,000lbs towing and 1,200lbs of tongue weight.
Depending on your boats coupler you will want a 2 inch ball like # a-90 or a 2-5/16 inch ball # 19286 for the Draw-Tite # 4280. A ball that will work in the Andersen ball mount is the # 40038 for 2 inch or # C40007 for 2-5/16 inches.
I have linked all the above mentioned products as well as a few Help Articles to this page for your convenience.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 12000 lbs GTW
- Class III
- CURT
more information >
Draw-Tite Ball Mount for 2" Hitch - 1" Rise, 2" Drop - 8-1/2" Long - 12,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Silver
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 12000 lbs GTW
- Class IV
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 10,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 10000 lbs GTW
- Class III
- CURT
more information >