Parts Needed to Flat Tow a 2003 Saturn L300 with Roadmaster Falcon 2 Tow Bar
Question:
I would like to flat tow a 2003 Saturn L300 behind my motorhome. My motorhome came with a Falcon 2 tow bar. I believe I need a base plate and wiring kit, and perhaps a braking system. I understand the Roadmaster 523114-1 is the only Roadmaster base plate that would work on this vehicle? The wiring Id like to do is one that taps into the vehicle wiring harness and uses existing bulbs for turn and stop. Not sure what wiring kit would work?
asked by: Mark C
Expert Reply:
We have everything you will need. For the base plate kit you would want the EZ part # 523114-1 which is confirmed to fit your 2003 Saturn L Series and will work great with your Roadmaster Falcon 2 # RM-520.
For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BRK2019, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Standard
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster EZ Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Base Plate for Tow Bar
- Shop: Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Shop: Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Shop: Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Q&A: Grease Seal to Replace Transcom Seal 22333VB in 5th Wheel Hub
- Q&A: Arm Will Not Release on a Roadmaster Falcon All Terrain Tow Bar
- Q&A: Comparing the Roadmaster Direct-Connect and Crossbar-Style Base Plate Kits
- Q&A: Can a 1997 Ford Taurus be Flat Towed Behind a Motor Home
- Q&A: Will The Roadmaster bracket kit 523114-1 Fit My 2000 Saturn SL
- Q&A: How To Attach Roadmaster StowMaster Tow Bar to a 1983 Chevrolet C/K Series Pickup
- Q&A: Recommended Components For Flat-Towing 2007 Saturn Ion