Compatibility of 34822BX 2000lb Capacity Idler Hubs With TRU94FR Spindles
Question:
do the TRU94FR axles fit the 4 on 4 wheel hubs
asked by: Alan F
1
Helpful Expert Reply:
The # AKIHUB-440-2-1K Axle Tec Hub for a 2000 lb capacity axle uses the L44643 inner/outer wheel bearing. The L44643 bearing is compatible with the # TRU94FR spindle. The grease seal used by the hub kit is also compatible, so the # AKIHUB-440-2-1K hub is indeed compatible with the # TRU94FR spindle.
expert reply by:
Mike L
1
Products Referenced in This Question
BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Trailer Hubs, Wheels, And Tires For a Homemade Motorcycle Trailer
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Replacement 1/2-20 Wheel Stud For Reliable 1206 Trailer Hub
- Article: How to Measure a Trailer Axle
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Q&A: A-Frame Coupler with Smaller than 50 Degree Angle
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Maintenance Schedule