Installation of BoatBuckle G2 Ratcheting Tie-Downs on Shoreland'r Trailer for Lund Angler SS

Question:

2000 lund angler SS, weight is about 1000 lbs 200 Shorelandr SLR20 trailer, dont know weight The transom strap holes on the trailer are a little more than 1 inch wide. Will this retractable strap and the Boat Buckle mounting bracket work with a hole that size? Pictures attached.

asked by: Dennis S

Expert Reply:

You can still install the tie-downs, but since the installation hardware used for the BoatBuckle G2 Tie-Downs # IMF14220 is 3/8 inch in diameter, the 1 inch transom strap holes on your trailer will be too large to install these tie-downs.

The best solution to installing the # IMF14220 is to drill a new hole to match the size of the BoatBuckle installation hardware. I have attached the installation instructions for the BoatBuckle G2 tie-downs for you.

The # IMF14220 has a safe working load limit of 833 pounds each strap. These will work well to secure your 1,000 pound boat. The straps measure 2 inches wide x 43 inches long. I've attached a review video of these ratcheting tie-downs.

If needed, the Mounting Brackets for BoatBuckle G2 # IMF14254 can help provide a better angle or position to mount the BoatBuckle.