Fit of Trailer Hitch, Installation of Hopkins Vehicle Wiring Harness for 2000 Honda Accord Coupe
Question:
Hi. I just wanted to double check the tow hitch model numbers that will fit my 2000 accord coupe 2.3ltr. Does the coupe accept same as sedan? #C11290 And do u know approximate location for plug n tow #43105 female end in my vehicle. Do I have to unplug existing light harness to plug in the trailer harness or is there an empty accessory plug already located in my vehicle? Thanks so much.
asked by: Joseph M
Helpful Expert Reply:
The trailer hitches we offer for the 2000 Honda Accord are confirmed to fit all models of the Accord, so they will work well on your coupe. The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11290 that you referenced will work well on your Accord Coupe.
The Curt Hitch # C11290 has a maximum trailer towing capacity of 2,000 pounds and tongue weight capacity of 200 pounds. It is important to keep in mind that if your Accord's towing and tongue weight capacity is less than that of the hitch, your vehicle's capacity will limit how much weight you can tow. I have attached the installation instructions for you.
To install the Hopkins Vehicle Wiring Harness # 43105, the installation instructions indicate that for Honda the vehicle-side connector for the wiring harness is located inside the spare tire compartment of the vehicle. There may be a cap on this connector that will need to be removed before the # 43105 can be installed. I have linked the installation instructions for you.
If you need a drawbar and hitch ball, Curt recommend using the 2-1/8 Inch Rise or 2-3/4 Inch Drop # 3592. This drawbar uses a hitch ball with a 3/4 inch shank diameter like # 19256 for a 1-7/8 inch hitch ball. I've attached a help article on how to choose the correct rise/drop ball mount for you.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Hopkins
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- No Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Tail Light Converter with 4-Way Flat Trailer Connector
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Where Does A Trailer Wiring Harness Plug In On A 2020 Subaru Crosstrek
- Article: How to Measure for Trailer Hitch Drop
- Q&A: 4-Way Trailer Wiring Harness For 2024 Kia EV6
- Q&A: Can the Kuat Sherpa 2.0 Bike Rack Carry a Bike with a 48 Wheelbase
- Q&A: Does Curt Hitch C11327 Fit a 2006 Honda Accord Sedan with Dual Exhaust
- Q&A: Where are the Attachement Points for Curt Trailer Hitch # C11290 on a 2003 Honda Accord
- Article: Trailer Maintenance Schedule
- Q&A: Can I Integrate A Backup Camera Using A U-Connect Screen And Furrion Back Up Camera On 2021 RAM 1500
- Q&A: Can a Class II Yakima Bike Rack be Used in a Class I Draw-Tite Hitch on a 1999 Honda Accord
- Article: Hitch Adapters and Extenders
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Trailer Hitch Installation Tips