Can a KarGard be Used on a 2015 GMC Canyon While Being Flat Towed  

Question:

Expert Reply:

It is important not to block the radiator of a vehicle that is being driven as the vehicle would overheat. But when a vehicle is being flat towed the motor isn't running so the radiator would not need air flow.

You could use the KarGurd part # BX8870 while flat towing your 2015 GMC Canyon because of that.

The Blue Ox Base Plates, part # BLU93FR is designed to work with your Canyon if it is a 4WD.

You will need some other items when flat-towing you Canyon. I recommend the Blue Ox Alpha # BX7380. Safety cables are included with this tow bar.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by: Jameson C

0