Lug Nut Torque Specification with Trailer Idler Hub Assembly AKIHUB-440-2-G-1K
Question:
What is the torque specification for this lug and hub assembly?
asked by: Phil
0
Expert Reply:
The # AKIHUB-440-2-G-1K uses a 1/2 inch wheel stud. 90-95 ft lbs of torque is probably about right for the lug nuts. If you check out the lug nut torque chart that I attached you will see that nearly all the torque specs are that and higher. The wheel material also affects torque ratings, so it is lower for aluminum and higher for steel.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Search Results: marine grease
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range B
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30050 Review
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range B
- Q&A: Replacement Idler Hub Recommendation For Boat Trailer With 07100 Bearings
- Q&A: Correct Bearing Buddy Grease Seals for 1" Trailer Spindle
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-1K Review
- Search Results: akihub~440~2~2k
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30000 Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-EZ-1K Review
- Q&A: Replacement Hubs with 4 on 4 Bolt Pattern for 1" Non-Tapered Spindle on Boat Trailer with 12" Wheels
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Video: Review of LubriMatic Grease and Lubricants - White Lithium Grease - L11354
- Search Results: bearing grease
- Search Results: wheel bearing grease
- Search Results: grease
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE23102 Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Search Results: hubs for 1 inch spindle
- Search Results: 12 20
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Comparing High and Low Pressure Propane Hoses and Thermoplastic Versus Rubber
- Video: Timbren Axle-Less Trailer Suspension System Test Course