Replacement Hub Recommendation for a 2000 Shorlander Model SD v 1831
Question:
Need to replace wheel hub assembly Bolt pattern 4 1/2 inch X 5 Can you recommend parts needed. My application does not require brakes. 2000 Shorlander model SD v 1831 Thanks
asked by: Rob B
Expert Reply:
I pulled up the manual from your boat trailer and was able to find out that your trailer has an 84 spindle on it which means we have a hub that will fit.
For an idler hub that would fit your hub that has a 5 on 4-1/2 inch wheel bolt pattern you would want the Dexter Hub part # 84545UC1-EZ. If you have a 6 on 5-1/2 inch bolt pattern you would want the Trailer Hub Assembly part # 84655UC1-EZ.
If you are unsure of what bolt pattern you have check out the FAQ article I attached determining bolt patterns.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement for Dexter 8-248 Idler Hub
- Q&A: Right Replacement Hubs for a Trailer with 3500 Pound Axle and 5 on 4-1/2 Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Trailer Hub for Dexter 8-248
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Article: Trailer Tire Sizing
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: How To Find Correct Hubs for 3,700 Lb Axis Products Trailer Axle
- Q&A: Are the Safety Struts for the etrailer Cargo Carrier Included
- Q&A: Trailer Idler Hubs With L44649 Inner and Outer Bearings And 1-1/4 Grease Seal
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams