Recommended High-Capacity Silver-Painted or Zinc Plated A-Frame Trailer Coupler
Question:
Im trying to replace a ram SAW/CSA class IV, 2-5/16inch ball , 14,000 lb gross, 2,100 tongue weight. needs in priority are: 1.0 mounting dimensions including jacking hole location and mounting bolts. 2.0 heaviest design you can recommend. 3.0 zink or silver paint/coating
asked by: Kevin C
Helpful Expert Reply:
It sounds like you're looking for a replacement a-frame coupler like # CA-5280-RB but in a silver-painted or zinc-plated finish. Please click on the link provided to see all bolt-on standard a-frame couplers for 2-5/16-inch balls.
For the highest-rated designs Demco part # DM16680-52 is a 21K-rated bolt-on coupler with a silver powder-coat finish and part # DM13205-95 has a zinc finish. Both fit jacks with a 2-1/4-inch diameter outer tube and have a standard 3-1/4-inch mounting hole spacing. Both fit standard 50-degree a-frame trailers.
I went to our warehouse and measured the 3/8-inch mounting holes' spacing. I prepared a photo for you with these dimensions.
Products Referenced in This Question
Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K
- A-Frame Trailer Coupler
- Standard Coupler
- Bolt-On
- 21000 lbs GTW
- 2-5/16 Inch Ball Coupler
- Auto Latch
- Demco
more information >
Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors, eZ-Latch - 2-5/16" Ball - 21K
- A-Frame Trailer Coupler
- Standard Coupler
- Bolt-On
- 21000 lbs GTW
- 2-5/16 Inch Ball Coupler
- Auto Latch
- Demco
more information >
Product Page this Question was Asked From
A-Frame Trailer Coupler w/ Round Jack Hole - Squeeze Latch - Black - 2-5/16" Ball - 15,000 lbs
- A-Frame Trailer Coupler
- Standard Coupler
- Weld-On
- 15000 lbs GTW
- 2-5/16 Inch Ball Coupler
- Trigger Latch
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors, eZ-Latch - 2-5/16" Ball - 21K
- Q&A: Option For Rubber Bumper For Rear of Trailer
- Shop: Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K
- Shop: Bulldog Heavy-Duty Cast Head Coupler w/ Wedge Latch - 2-5/16" Ball - A-Frame - 15,000 lbs
- Video: Review of Demco A-Frame Trailer Coupler - 50-Degree A-Frame Bolt-On Trailer Coupler - DM13205-95
- Shop: 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-1/2" Long Shank - Raw - 30,000 lbs
- Shop: Curt Heavy Duty Forged Ball Mount for 2" Hitches - 1" Rise - 2" Drop - 17,000 lbs
- Q&A: Can You Replace Stock Coupler On A 2023 ATC Raven Car Hauler With Demco Coupler # DM13205-95
- Video: Bulldog Heavy-Duty Cast Head Coupler Review
- Search Results: coupler
- Shop: Blue Ox Hitch Receiver and Coupler Latch Lock Set - Swivel Design - 2" Hitches
- Video: Demco eZ-Latch A-Frame Trailer Coupler Review and Installation
- Video: Buyers Products Tie Down Anchors - Trailer Tie-Down Anchors - 337B2402AL Review
- Shop: 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Raw Finish - 30,000 lbs
- Q&A: Will Demco A-Frame Trailer Coupler DM16680-52 Fit 2015 Featherlite 3116 Trailer
- Shop: Trailer Hitch
- Video: Bulldog A-Frame Trailer Coupler - Standard Coupler - BD44150WH301 Review
- Search Results: a frame
- Video: Review of Demco A-Frame Trailer Coupler - EZ Latch Coupler - DM16680-52
- Search Results: trailer door locks
- Search Results: trailer locks
- Video: Buyers Products 1/2 inch Cast Aluminum Chain Loop Review
- Q&A: Demco Bolt on A-Frame Coupler to Replace Welded On Coupler
- Article: Trailer Wiring Diagrams
- Q&A: Bolt-on Trailer Coupler to Replace Bulldog # BD028463
- Q&A: Difference Between Demco Couplers # DM13205-95 and # DM16680-52
- Shop: Tire Chains
- Q&A: Demco Bolt on A-Frame Coupler to Replace Broken Welded On Coupler
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: a frame jack