2013 Toyota Sienna Roof Rack and Fairing Recommendation

Question

Question:

Looking to purchase a complete roof rack system for my van. Standard rails on it already. Looking for sizes of crossbars and fairing size. Thanks.

asked by: Joe

0

Expert Reply:

For your 2013 Toyota Sienna that has factory raised rails on the roof we have the Malone AirFlow2 Roof Rack part # MPG216 listed as a confirmed fit. Then for a fairing we have the part # TH72WV which is 38 inches long.

expert reply by: Jameson C

0

Answer 1

While we have the measurements of the exact ground clearance height for our hitches we carry for a 2022 Toyota Sienna, we do have available measurements for a 2021 model. While these are not exact, the measurements will not deviate much from the…

view full answer...

Answer 2

On a vehicle that sits as low in the rear as your 2011 Toyota Sienna there are no hitches available that are going to give you excellent ground clearance, but the Draw Tite Hitch part #75237 that you referenced installs right under the rear fascia of…

view full answer...

Answer 3

The reason the part #76112 takes longer to install than the other hitches that fit your 2017 Toyota Sienna is that it installs higher than the other hitches and only has a visible hitch opening where the other hitches hang down further below. I…

view full answer...

Answer 4

I am sorry if we provided you with bad info here. I believe we made some assumptions about the Malone roof rack that were not accurate. The Hullavator #TH898 is made to work with a square bar roof rack, but it has to be the Thule brand. As you can…

view full answer...

Answer 5

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 6

The antenna on your 2023 Subaru Crosstrek sits low enough that clearance for the Inno Shadow 16 Rooftop Cargo Box #INBRA1210BK won't be an issue! If you don't already have a roof rack just let me know if your Crosstrek has a bare roof or the…

view full answer...

Answer 7

Yes, the Malone AirFlow2 Roof Rack part #MPG215 and the Malone AirFlow2 Roof Rack part #MPG216 will both fit the raised factory side rails on your 2017 Subaru Forester. The only difference between them is length as you alluded to, 50" long vs…

view full answer...

Answer 8

All of the roof top tents we carry require aftermarket crossbars like the Yakima Roof Top Tent part #Y07436 so for your 2016 Honda Odyssey that has a factory roof rack you would need to install a set of crossbars like the Malone AirFlow2 part…

view full answer...

Answer 9

Yes, the Malone Airflow 2 roof rack will indeed fit the factory installed rails on your 2021 Honda Odyssey. For a 65" bar you can do the #MAL24AR for black bars, or the #MPG217 for silver.

view full answer...

Answer 10

For your 2019 Mazda CX-5 with raised rails the Malone roof rack part number #MPG202 is a confirmed fit and would be a great option. This rack will give you an easy to install rack that will fit and work well on your vehicle so I recommend it for you.…

view full answer...

Answer 11

There is a Rhino-Rack Pioneer Platform Rack that fits your 2020 Lexus GX 460, though the right option will depend on if your Lexus has factory installed RAISED side rails that run front to back, or factory installed FLUSH side rails that run front to…

view full answer...

2013 Toyota Sienna Roof Rack and Fairing Recommendation

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching