Weight Distribution Recommended for Heartland Prowler Lynx 25 LX
Question:
I have a 2016 Heartland Prowler Lynx 25 LX with GVWR 6900 lbs, Dry Weight 4814 lbs, Hitch Weight 528 lbs, Carry Capacity 1,936 lbs. Connecting to a 2015 F-150 v8. When I purchased the Prowler I was advised that I would not require a Weight Distribution to pull, when connected to my truck I do see a dip and when pulling there is a slight sway when I reach 65 mph. What would be the best product for me?
asked by: Michael K
Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
Your dry tongue weight is 528 lbs. Your loaded tongue weight could easily be around 750 lbs so for a system that would work well with this that features sway control that works to prevent sway before it starts you would want the Reese Straitline part # RP66084 which has a tongue weight of 600-1,200 lbs.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
This will fix the sway and the rear suspension sag too.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Fastway
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Determining Trailer Tongue Weight
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Recommended Weight Distribution System for R-Pod Trailer
- Q&A: Weight Distribution System To Tow 4700 lb Trailer With Toyota Tacoma V6 With Tow Package
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Parts Needed To Install a Trailer Brake Controller On a 2024 Hyundai Santa Cruz With Factory 7-Way
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Q&A: Recommended Towing Mirrors For A 2016 Toyota Highlander
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Weight Distribution System for 3500 GVWR Pop-Up Camper Towed by Toyota Tundra
- Q&A: Weight Distribution Solution for Trailer that Has Angle Iron Frame Design