Weight Distribution System Recommendation for V-Nose Trailer with 1,500 lbs Tongue Weight
Question:
I am looking for 2 wt. Distribution and sway control hitchs for 28 foot vnose pace cargo tralers 10000 lbs loaded. 650 lb tongue wt when empty and up to 1,500 lb tw when loaded. Trailer has over slung hitch with 19.inches to top of hitch ball . And 13 inch cearance from bottom of frame to ground. I possibly can modify floor in vnose to install hanging brackets. I need a hitch that allows backing up. Towing with Ram 2500 with 2 inch receiver. I need a well built unit that will run about 25000 miles per year. Please recommend as soon as possible. Thanks
asked by: Bob F
Expert Reply:
Since you have a V-nose trailer you will need to go with bolt-on style frame brackets that will allow you to attach to the trailer frame without needing clearance above the frame channel.
Since your tongue weight is up to 1,500 lbs when loaded you will need to go with a higher rated system. The Strait-Line # RP66075 has a sway control unit that works to fight sway before it starts and has a tongue weight range of 1,000 lbs - 1,700 lbs. For bolt on brackets for your trailer you would need the part # RP58305.
For a shank you will need to check out the link I attached that has all of the shanks we carry that are properly rated. You will then need to select the rise/drop you need. I also attached a help article on how to determine what rise/drop is needed.
For a hitch ball you would then want the part # 63840.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 20,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 20000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
Chain Hangers for Reese Weight Distribution Systems - Bolt On
- Accessories and Parts
- Weight Distribution Hitch
- Chain Hangers
- Reese
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 17K GTW, 1,700 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1200 lbs
- 1300 lbs
- 1400 lbs
- 1500 lbs
- 1600 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Which Chain Link When Using Blue Ox SwayPro
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Can 20,000-lb Blue Ox SwayPro Weight Distribution System Be Ordered With 2-Inch Shank
- Q&A: What Hitch Ball Does Blue Ox Weight Distribution System Use?
- Q&A: Is Using the Blue Ox SwayPro BXW2000 On the 7th or 8th Link Accecptable
- Q&A: Blue Ox SwayPro Weight Distribution System Offering 3 Inches of Drop for Travel Trailer and 2016 Ram
- Q&A: Which Blue Ox Sway Pro Weight Distribution System Do I Need For 1,500LBS Of Tongue Weight?
- Q&A: Recommended WD System for a 17,000 lb GVWR Trailer Towed by a 2017 Chevrolet Silverado 2500
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class