Dacromet Kodiak Disc Brake Kit Recommendation to Replace UFP DB35 Kit On Trailer
Question:
I need to replace the rotors and calipers on an eight year old boat trailer that gets used in salt water. The dealer says the existing kit is the UFP DB35 assembly. Is there a Kodiak assembly with the Dacromet finish that matches the specs of the UFP brand? Here is the spec: Bearing Size: 68149 Inner and 44649 Outer Seal: 168255 Spindle: 1 3/8inch x 1 1/16 Bolt Pattern: 5 on 4.5inch 13inch and larger wheels Axle Rating: up to 3750lbs.
asked by: Ray S
Expert Reply:
For a dacromet Kodiak disc brake kit that would fit your axle you would want the part # K2HR35D. This will fit and work well but you will need to go with the seals # 168255TB instead of what comes with the kit.
I attached an install video for you to check out as well.
Products Referenced in This Question
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.687 Inch I.D.
- 2.561 Inch O.D.
- Dexter
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Continue Researching
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Q&A: How to Convert Drum Brakes to Disc Brakes on a 2005 Boat Trailer
- Q&A: Difference Between Dexter DX7.5L A-60 Brake Actuators For Disc Brakes
- Q&A: Recommended Coupler for Boat Trailer With 3" Wide Channel
- Q&A: Dimensions and Mounting Hole Spacing of Demco Channel Tongue Trailer Coupler # 12564
- Article: Where to Position the Trailer Axle?
- Q&A: Replacement Disc Brakes for 2013 EZ Loader Adjustable Boat Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: Adding Electric Over Hydraulic Disc Brakes