Trailer Hitch and Wiring to Tow Rental Trailer with 2002 Toyota Solara
Question:
Hi, I really need to know if this hitch will be compatible with pulling a rental traler. I would rather buy one from you instead of them but I HAVE to know if it will be compatible because I am moving soon.
asked by: Shyla
Expert Reply:
Yes, Draw-Tite trailer hitch # 36336 for your 2002 Toyota Solara is compatible with any rental trailer. Hitches are not trailer-specific so there won't be a problem. Just make sure that the trailer does not exceed the towing capacity of the vehicle.
To tow the trailer you will also need the following:
Ball mount # 3593
1-7/8 inch ball # 19256 or
2 inch ball # 19258 (whichever size the coupler on the trailer needs)
Trailer wiring harness # 119178KIT to power the lights on the trailer
Products Referenced in This Question
Tekonsha Tail Light Converter with 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 1-1/2 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Diameter of Replacement Hinge Pin # 362TRCHingePin2
- Q&A: 4 Lug Trailer Wheel and Tire with Higher Speed Rating
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Does Installing a Hitch on a 1999 Toyota Camry Involved Cutting Fascia or Bumper
- Article: How to Choose a Cargo Carrier That Will Clear a Rear Mounted Spare Tire or Bumper
- Article: Trailer Hitch Installation Tips
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Q&A: Tips for Cleaning Weld Nuts to Install Hitch in 2004 Toyota Camry
- Q&A: Can I turn my Boat Trailer Axle Upside Down to Gain the Clearance I Need?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Trailer Hitch Recommendation and Towing Capacity for 2003 Toyota Camry