Trailer Hitch and Wiring for a 2016 Toyota RAV4 Hybrid
Question:
Will this fit my 2016 hybrid
asked by: Brad.
Expert Reply:
Yes! I am happy to report that the etrailer trailer hitch # e98864 will fit your 2016 Toyota RAV4 hybrid model.
If you want to use the hitch for accessories such as a bike rack or cargo carrier keep in mind that the vehicle has a tongue weight capacity of 150 pounds (consult your owner's manual to confirm). This means that even if a hitch has a higher rating you are still limited to the lower 150 pound capacity so the combined weight of a bike rack or cargo carrier and whatever you have loaded on them cannot exceed 150 pounds.
If you plan on doing some towing the same rules apply: the tongue weight capacity maxes out at 150 pounds and the gross trailer weight, which is the most the trailer can weigh, is at 1,500 pounds.
For a ball mount and accessories for towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
And for trailer wiring I recommend harness # 118578 to add a 4-Way flat connector to the rear of the vehicle. I have linked videos for you showing installations of the hitch and wiring.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 525 lbs WD TW
- Visible Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: How to Find an Installer for the etrailer Trailer Hitch for 2015 Toyota RAV4
- Q&A: Trailer Hitch Recommendation for 2011 Toyota RAV4
- Q&A: Does etrailer.com Hitch # E98864 Fit 2018 Toyota RAV4 Hybrid and Allow Handsfree Liftgate
- Q&A: Does Appearance Panel that gets Removed to Install a Hitch on a 2016 Toyota RAV4 Serve Purpose
- Article: How to Choose a Hitch-Mounted Bike Rack
- Q&A: Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4
- Article: Trailer Hitch Installation Tips
- Article: How to Measure for Trailer Hitch Drop
- Q&A: 2017 Toyota RAV4 Trailer Hitch and Wiring Recommendations