Will Hubs And Brakes From Hayes AL_Ko Axle Work With Dexter Axle

Question:

I have an AL_KO axel now will my hubs and brakes work with a dexter ax ? if not do you do AL-KO its a 2011 model thanks

asked by: Tom D

Expert Reply:

There is a way to see if the hubs and the brakes you have on your Hayes AL_Ko axle will work with a Dexter axle. You would need to know the size of the hub components, bearings, race, and seal. You can remove one of the hubs on your axle and check out the components. I have attached a photo that shows where you can typically find the numbers on the bearings, race, and seal.

We do offer several Hayes/AL-KO parts. After you determine what you have you can check our website to see if the parts we carry would be suitable replacements for you.

If you are unable to find the numbers or you cannot read them, you can use a digital caliper like part # PTW80157 and take some measurements of the spindle in the locations noted in the attached photo, and also the inside dimension of the hub bore. This would give you the most accurate way to find the right components you need.

When you get those dimensions let me know and I will be glad to make some recommendations that will work for you.

expert reply by: Jeffrey L