Parts Needed to Install Brake Controller on 2000 Range Rover HSE

Question:

I have no current trailer wiring whatsoever but want to tow a trailer braked trailer. I have a 4 wire adapter kit from Atlantic British came with the vehicle, not installed yet. I assume I also need a controller like Tekonsha Prodigy P3 and an ETBC7 Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires. Correct? My question is, the Rover dealer has quoted me to install the appropriate 7-pin wiring but I dont know if that wiring eliminates the need for an external brake controller. Do you know?? Thanks!

asked by: Joe N

Expert Reply:

If the trailer you're wanting to pull has electric brakes, and you want them to operate, you will need a brake controller. Having a dealer-installed 7-way won't eliminate the need for a brake controller.

It sounds as if you've got a good handle on what you need. I'm not sure what '4 wire adapter kit ' you're speaking of consists of, but if it provides a 4-pole trailer connector for your Range Rover, the only other parts you'd need are the # ETBC7 brake controller installation kit you referenced and the Prodigy P3 brake controller, part # 90195.

I've linked you to an FAQ article about brake controllers, as well as to the instructions for the # ETBC7 kit.

expert reply by: Mike L