Will the Stromberg Carlson Trailer Tray Cargo # CC-255 Fit a Forest River R-Pod Trailer

Question

Question:

Will the Stromberg trailer tray work on the frame of a 2013 forest river R-Pod?

asked by: Mark H

0

Expert Reply:

Yes, we had a customer with a similar R-Pod trailer as yours leave a review saying that the Stromberg Carlson Trailer Tray Cargo # CC-255 worked well on their trailer so it would work well for you as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I'd recommend you use the Bike Rack Bunk adapter part #CC-275 to allow you to carry a bike rack over the propane tanks of your R-Pod. The most popular bike rack we carry that has been confirmed to fit this adapter is the Thule Camber 2 part…

view full answer...

Answer 2

The Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs #CC-275 can fit any widths between 12 inches and 52 inches. The bars rotate so they are compatible with any width between but that will move the…

view full answer...

Answer 3

In order to transport a girl's bike (or any bike with alternative style frames) to a hanging rack like the Malone Runway 4 Bike Rack #MAL72VR, you will just need a bike frame adapter bar. I recommend the Kuat #UB01 because of how easy it…

view full answer...

Answer 4

If you're looking for a 3-bike rack, the Malone Hanger #MPG2130 is a good choice for your 2019 Jeep Cherokee Trailhawk. The trailer hitches made for the 2019 Cherokee, like the Draw-Tite #75998 or Curt #C13395 sit pretty flush with the rear…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 9

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 10

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 11

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 12

You should not need an extension for the Hollywood Racks Destination E Bike Rack #HLY66ZR to fit on your 2021 Jeep Wrangler Unlimited Sport. We installed this on a 2021 2-door Wrangler which I have included the install video linked near the bottom of…

view full answer...