Will a Sidewinder Fit in Place of a Leland 7900 Pin Box  

Question:

Expert Reply:

According to my contact at Reese the Leland 7900 pin box has the same measurements as the 7910. But it is always a good idea to check just to be on the safe side. If your pin box has the following measurements then Sidewinder # ST400-5AS16K will fit:

Distance from first row of bolt holes to last row on center - 7 inches
Distance vertically from one bolt hole to another on center - 1-1/2 inches
Bolt size - 1/2 inch bolts
Bolt head size - 3/4 inch
Bolts per side - 6
Center of first row of bolt holes to center of king pin - 21 or 9 inches
Center of back row of bolt holes to center of king pin - 28 or 16 inches
Pin box width - 14 inches

I have included a link to a couple of help articles that should also help.

expert reply by: Michael H

0