Recommendation for Packing Bearing With Grease Prior to Using Grease Gun on an EZ-Lube Axle
Question:
I am installing new EZ-Lube axles on a horse trailer. When installing the hubs, is it necessary to pack the bearings with grease prior to installation? Or will application of grease through the zerk fitting after installation be sufficient? Thank-you
asked by: Steven G
Expert Reply:
I highly recommend packing the bearings with grease prior to installing them on your new axle and then continue to fill up the remaining space with the EZ-Lube feature. You want to do this because it's important to make sure they are all lubed up before taking off.
The EZ-Lube feature is typically to help maintain the amount of grease within the axle between trips. If you pre pack the bearings you can be worry-free that your new bearing won't be damaged that first trip.
If you would like to limit the mess, I recommend using a bearing packer, part # L70025. I have linked a video that you may find helpful as well.
Product Page this Question was Asked From
LubriMatic Deluxe Bearing Packer
- Lubricants Sealants Adhesives
- Greasing Tools
- Bearing Packer
- LubriMatic
more information >
Continue Researching
- Search Results: 9/16 lug nuts
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Shop: Replacement Shoe and Lining for Nev-R-Adjust 12" x 2" Electric - RH
- Search Results: tounge lock
- Shop: Trailer Wheel Lug Nut - 9/16" Diameter - Zinc Plated
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 5/8" Studs
- Search Results: brake shoes
- Search Results: timken bearings
- Search Results: national seal
- Search Results: timken
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Q&A: How to Apply Grease using E-Z Lube Spindles
- Q&A: When Should Trailer Wheel Bearings be Replaced
- Shop: RV Bike Racks
- Q&A: Can Air Powered Grease Gun Be Used to Grease Hub on EZ Lube Spindle
- Q&A: Correct Trailer Tire psi and General Maintenance
- Q&A: How to Identify Correct Replacement Bearings and Seals for Boat Trailer
- Video: Performance Tools Bearings, Races, and Seals Installation Set Review
- Video: Curt Soft Trac I Trailler Breakaway Kit Review
- Video: etrailer Trailer Brakes AKBRKR-AS-1012 Review
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: How to Level 5th Wheel Trailer Towed by New Taller Pickup
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: etrailer Trailer Bearings Races Seals Caps - Bearings - LM67048 Review
- Video: Go Power Lithium RV Battery Installation