Information Needed To Specify Replacement Trailer Axle for 6x12 Enclosed Trailer
Question:
My enclosed cargo trailer is a 6X12. It measures 93inch wide from fender to fender. My GVWR is 2990 on a Dexter axle and leaf spring suspension, 5 lugs and no brakes. I am shopping for a 3500 LB axle, 5 lugs with brakes. I cant seem to find one that will fit my trailer. can you please assist?
asked by: Vince
Expert Reply:
In order to see if the stock axles we offer would work for your needs, I'll need more information from you.
I'd need to know the hub face to hub face dimension, as well as the spring center to spring center distance. I'll provide a diagram showing the exact dimensions I need. For instance, the # e43SR axle you specified has a 89 inch hub face length and a 74 inch distance between the spring centers.
A 3500 lb axle with a 5 bolt lug usually uses a 4-1/2 inch bolt circle, so I'll also need to know your exact wheel bolt pattern. The FAQ article I'll link to shows how to measure this.
If you're wanting to reuse your existing hubs, I'll need to know the inner and outer bearing reference numbers, as well as the diameter of your hub bore where the grease seal sits and the diameter of the spindle where the grease seal rides. A digital caliper like # PTW80157 is the best way to get a highly accurate diameter measurement.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 10,000-lb Axles - 8 on 6-1/2
- Search Results: 10k hub
- Shop: Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 10,000 lbs
- Shop: B&W Continuum Weight Distribution System w/ Sway Control for 2" Hitch - 16K GTW, 1.6K TW
- Shop: Optronics Thinline LED Trailer Clearance or Side Marker Light - Submersible - 4 Diodes - Red Lens
- Shop: Electric Jack w/ Footplate and 7-Way Plug - A-Frame - 25-1/8" Lift - 3.5K - Black
- Shop: Replacement Bottom Lug for Polar Cam-Action Latch Kit - Stainless Steel
- Shop: ThinLine LED Clearance or Side Marker Light - Submersible - 2 Diodes - Rectangle - Red Lens
- Search Results: mcl61rb
- Search Results: dexter 21 88
- Search Results: clearance lights
- Search Results: clearance lights red
- Q&A: Which is Better, a Side Wind Trailer Jack or a Top Wind Trailer Jack
- Shop: Suspension Enhancement
- Search Results: 3500 lb 4" drop trailer axles
- Q&A: Installing a Timbren Silent Ride System
- Search Results: shackle bushings
- Video: Dexter Axle Trailer Axles - Leaf Spring Suspension - 35545E-ST-EZ-89 Review
- Video: Review of etrailer Trailer Fenders - Tandem Axle Steel Fender - HP44VR
- Q&A: How to Determine the Correct Axle Position When Building a Trailer
- Q&A: How to Pick Out an Axle for a 6 x 12 Utility Trailer
- Q&A: 3,500 lb Trailer Axle Hub with 5 on 4-3/4 inch Bolt Pattern
- Video: Review of Optronics Trailer Lights - GloLight Backup Light - BUL111CFPG
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-5475-35-K
- Shop: Brake Controller
- Q&A: Can a 2,500 Pound Drop Axle Be Upgraded to 3,500 Pound Straight Axle
- Q&A: How to Prevent Trailer Axle from Hitting the Frame
- Article: How to Raise Your Travel Trailer Height
- Video: Redarc Tow-Pro Elite Trailer Brake Controller Installation - 2015 Toyota 4Runner
- Video: SumoSprings Trailer Helper Springs Review