Transmission Cooler Recommendation for 1996 Subaru SVX
Question:
bonjour je voulais savoir le quelle et le mieux approprié pour ma Subaru svx elle est de 1996 cordialement Hello, I wanted to know where and most suitable for my Subaru SVX. It is a 1996. Best regards.
asked by: Patrick
Expert Reply:
The transmission cooler I recommend for your 1996 Subaru SVX is the Derale Series 8000 Plate-Fin Transmission Cooler Kit with Barb Inlets, Class III # D13503. This cooler will provide a large surface to help further cool the transmission fluid, with the cooler measuring 11 inches wide x 8-3/4 inches tall x 7/8 inches deep.
The plate and fin style transmission cooler offers an increased surface area for cooling over the more traditional tube and fin style. Derale's # C13503 cooler a great size and well suited for your SVX.
The best location to mount the transmission cooler is directly in front of the radiator, behind the vehicle's grille. This will allow for the best air flow for the transmission cooler. The second best location is to mount the cooler after the radiator. The radiator will limit the air flow to the cooler, but will still provide sufficient air for cooling. It is a good idea to check the engine compartment of your vehicle to ensure that you have enough room to mount the cooler.
I have attached the installation instructions for the cooler as well as a help article on transmission coolers for you. I have also attached an installation video of the cooler on a Honda Pilot for you to have an idea of the installation process.
Products Referenced in This Question
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- Standard Mount
- 11W x 8-3/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Product Page this Question was Asked From
Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Car
- Standard Mount
- 11W x 3-7/8T x 1-1/4D Inch
- With 1/2 Inch NPT
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Frequently Asked Questions About Transmission Coolers
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Engine Oil Coolers
- Article: Anti-Rattle Devices
- Q&A: Choosing a Transmission Cooler for a 2019 Jeep Grand Cherokee
- Q&A: What is Difference Between Weight Distribution Tongue Weight and Weight Carrying Tongue Weight
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What do the Class Ratings Mean on the Transmission Cooler Pages
- Q&A: Mounting Hole Dimensions for Flex-a-lite Transmission Cooler FLX400117
- Q&A: How to Test Brake Controller without Trailer Connected
- Q&A: How to Wire a Brake Controller in a 2011 Chevrolet Colorado