Troubleshooting Trailer Wiring Where Taillights and Side Markers arent Functioning
Question:
Tail lights and side makers aint working fuses are good
asked by: Freddy
Expert Reply:
First thing you should do at this point is test the 4-way of the wiring harness with a circuit tester part # PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached.
If the voltage checks out there but the trailer lights still don't function right then the problem is on the trailer wiring. That would mean that problem is either due to a ground issue or a short issue.
Make sure that the trailer side connector are clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces. The light grounds should also be attached to clean and corrosion free bare metal surfaces. If there is anything between a light ground and the metal trailer frame or if the trailer has an aluminum frame, tilt bed, or folding tongue, any of these things can interrupt the ground. Running jumper wires from the light grounds to the main trailer connector ground can help.
If the problem is on the vehicle side then I would first recommend you double check how the harness is installed on your vehicle, make sure all of the connections are good and tight. You should check all towing related fuses and relays as well.
Products Referenced in This Question
Product Page this Question was Asked From
Mighty Cord Trailer Connector Adapter - 4-Way Flat to 6-Way Round - 12" Long
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 4 Flat
- Plug and Lead
- 6 Round
- Mighty Cord
more information >
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: Tow Bar Lighting Solution for 2023 Jeep Wrangler that Allows Charge for Battery
- Q&A: Best Stabilizers To Replace Scissor Style Jacks On 2019 Rockwood 2109RS That Rusted
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: Must-Have Flat Towing Components
- Article: Performance Chips and Modules
- Q&A: Parts Needed to Flat Tow a 2011 Ford Escape Behind a Motorhome
- Q&A: When Flat Towing a Vehicle How Much Tongue Weight is on the Trailer Hitch
- Q&A: Replacement Fender for a Harbor Freight Folding Trailer with 4.80x12 Tires
- Q&A: How to Prepare a 2023 Ford Bronco For Flat Towing
- Q&A: Dimensions of Ark Drop Down Corner RV Stabilizer Jacks