Slipper Spring and Tandem Axle Hanger Kit Recommendation for a 14k Trailer
Question:
I will be replacing the axles on my trailer and would like to upgrade the suspension. The existing double eye leaf springs are 26inch x 1 3/4. Two of the existing spring hangers are broken. Is there any advantage to installing slipper springs? Do you have a complete kit with springs and all hardware rated for 8,000# or 9,000# axles Thanks
asked by: Ed G
Helpful Expert Reply:
Both slipper springs and double eye springs will work just as well as the other as long as they are rated for the weight of the trailer. Typically slipper springs are seen more on the heavier capacity trailers.
For an 8k axle rated spring you really only have the option of slipper springs. You would want the # e46SR like you referenced.
For a tandem axle hanger kit for use with this spring you would then want the part # AP216-H238.
Products Referenced in This Question
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- Dexter
more information >
Product Page this Question was Asked From
1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 6000 lbs
- 1-3/4 Inch Wide
- 1 Leaf
- 25-1/4 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Shop: Equalizer Suspension Bolt with Locknut - 5-1/4" Long
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 5-1/2" Long
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Video: Review of Redline Trailer Leaf Spring Suspension - Equalizers - AP216
- Shop: Trailer Wiring
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K
- Video: Review of Tekonsha Custom Fit Vehicle Wiring - Universal 7-Way Trailer Hitch Wiring - 22551
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Search Results: spare tire bracket
- Search Results: 7 wire harness
- Search Results: trailer hub wheel stud
- Search Results: trailer wiring cable
- Search Results: electric drum brakes
- Search Results: equalizer
- Search Results: drum brakes
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: Dexter Tandem-Axle Trailer Hanger Kit for 2 Inch Slipper Springs
- Article: Slipper Spring Trailer Suspension System Review
- Shop: Trailer Hitch
- Q&A: Can 6-Leaf Slipper Spring 8000lb e46SR Be Installed On 7000lb Trailer Axle?
- Q&A: What is the Hanger Spacing on the 6-Leaf Slipper Spring # e46SR?
- Q&A: How to Pick Out a Replacement Hub For a Trailer with Timken Bearings
- Q&A: Hanger Spacing Dimensions for Installing E5115 Slipper Springs on Tandem Axle Trailer
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Article: Where to Position the Trailer Axle?
- Video: Review of Dexter Trailer Leaf Spring Suspension - Standard Equalizer - HAP-205-01
- Article: Determining Trailer Tongue Weight