Will Pro Series Snap-Ring Swivel Marine Jack Fit 3-1/2 Inch Tall Trailer Frame
Question:
Will this fit a 3-1/2 tongue properly without mods.
asked by: Doug
Expert Reply:
I believe you are referring to the Pro Series Snap-Ring Swivel Marine Jack # PSEJ10000101. The mounting holes on this jack are spaced so that is can mount on a trailer frame up to 5 inches tall. I have attached a photo of the mounting dimensions for you.
This jack should work well for the height of your trailer's tongue, but you will want to make sure that the tongue isn't too wide to accommodate the jack. The # PSEJ10000101 jack can accommodate a trailer tongue up to 3 inches wide.
If this is not the trailer jack you are referring to, please let me know and I will be happy to determine if a different jack will fit.
Product Page this Question was Asked From
Pro Series Snap-Ring Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,000 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 0 - 1000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Bolt-On
- With Wheel
- Pro Series
more information >
Continue Researching
- Q&A: Recommended Spare Tire for a Ironton Trailer
- Q&A: Brake Assembly Recommendation for 2005 Wells Cargo Cycle Wagon Trailer with Dexter 3500 lb Axle
- Article: Replacement Automotive Lighting
- Q&A: Appropriate Wire Gauge For Trailer Wiring
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Correct B&W Turnoverball Underbed Gooseneck Trailer Hitch for 2019 Ram 2500 Without Prep
- Q&A: Common Torque Specifications for Lug Nut Size
- Q&A: Can 4.80-12 Tires Be Upgraded to 5.30-12 Tires
- Q&A: Replacement Tire Options For a 165SR13 Trailer Tire
- Article: How (and Where) to Connect an RV Propane Grill
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Slipper Spring Trailer Suspension System Review
- Article: Trailer Jacks
- Article: Most Popular Wheel Bearings