Ramp Spring Recommendation for 72 inch Wide Door that Weighs 160 lbs
Question:
I have a ramp door that is 72 inches wide, the weight is approximately 160#. What is the minimum distance between the drums on your CB250D96SHD can they be adjusted to a narrower width?
asked by: Bob
Expert Reply:
The whole assembly (96 inches wide) would be too long to trim down and still fit. I'd recommend going with the slightly smaller # 362SA7, which can be trimmed down. The spring has a capacity of 150 lbs. That means you will need to slightly support the door but it will be very minimal and will allow great assistance with operation.
The # CB250D96SHD although rated for up to 250 lbs is also only able to be cut down to 80 inches.
We strongly recommend having a professional overhead door technician install the spring for you. The spring needs to be tensioned, and if it lets loose accidentally it would fling tools at high enough velocity to easily kill someone.
Products Referenced in This Question
Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Single Spring - 150-lb Capacity
- Trailer Ramp Springs
- Single Ramp Spring
- Conventional
- 150 lb Capacity
- 79 Inch Wide Spring
- 79 Inch Wide Doors
- 4-7/8 Inch Tall Spring
- Steel
- TRC
more information >
Product Page this Question was Asked From
Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 250-lb Capacity
- Trailer Ramp Springs
- Dual Ramp Spring
- Conventional
- 250 lb Capacity
- 94 Inch Wide Spring
- 96 Inch Wide Doors
- Steel
- M-3 and Associates
more information >
Continue Researching
- Q&A: Will the AT91367 Replace an Atwood 93257 Circuit Board?
- Q&A: Will Firestone Air Bags Interfere if I Install a B&W Gooseneck Trailer Hitch for a 2004 Dodge 2500
- Q&A: Fit of Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1313 with my 2006 Dodge 3500 8 Foot Bed
- Q&A: Would Enclosed Trailer Ramp Spring # CB250D96SHD Be Rated High Enough for 92 x 74 inch Ramp
- Q&A: Replacement 15' Awning For Lippert Edge That Allows For Solera Screen/Family Room
- Q&A: How to Calculate the Weight of the Ramp to Make Sure Door Spring is Correct
- Q&A: How to Correctly Position Ramp Door Spring for Installation
- Article: Roadmaster Vehicle Specific Base Plates
- Article: 2 Steps for Hooking Up an External Propane Tank to Your RV
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: Cargo Tie-Down Methods
- Article: 2023 Best Gifts for Auto Enthusiasts