50mm Ball and Ball Mount w/ a 2 Inch Drop for a 2014 Jeep Patriot w/ a Class III Trailer Hitch
Question:
I have a Class 3 receiver installed on a 2014 Jeep Patriot with a 2 inch opening and I need to add a hitch with approximately a 2 inch drop and 50mm ball for use with European trailers under 2,000 lbs. This ball has a 3/4 inch shank, but most of the 2 inch mounts seem to require a 1 inch shank. Can you please recommend a ball and mount combination or a Euroball that would work for this application? Thanks!
asked by: Josh
Expert Reply:
I have a solution for you. First, for a 50mm ball I recommend # 63912. Then for a ball mount with a 2 inch drop I recommend # D-4 and the Hitch Pin and Clip, # PC3. You are right, the ball mount takes a ball with a 1 inch shank diameter so to be able to use the 50mm ball with its 3/4 inch shank, you will also need bushing # C21100. This will allow the 3/4 inch shank to work with the 1 inch ball hole.
Products Referenced in This Question
Curt Reducer Bushing for Ball Mounts - 1" to 3/4"
- Accessories and Parts
- Trailer Hitch Ball
- Bushing
- 1 Inch to 3/4 Inch
- CURT
more information >
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >