Will Curt Trailer Hitch Fit 2016 Toyota Tacoma SR Utility Model
Question:
Good morning. Just want to confirm that your trailer hitch C13264 will fit this utility model. Also, assuming it fits, would you email the installation instructions? Thanks,
asked by: Richard C
Expert Reply:
The Curt Receiver Hitch, part # C13264 is confirmed as a fit for your 2016 Toyota Tacoma.
This is a Class lll hitch and it has a 2 inch receiver opening. I have attached the installation instructions for asked about. No drilling is required to install this hitch, but you will need a torque wrench like part # ALL944001.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
If you do not have a trailer wiring harness on your Tacoma I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector, part # C59236.
When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical connections and helps prevent corrosion.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Powerbuilt Dual Drive Torque Wrench - 3/8" and 1/2" - 10 to 150 ft-lb
- Automotive Tools
- Wrenches
- Torque Wrench
- 150 ft/lbs
- 1/2 Inch Drive
- 3/8 Inch Drive
- Powerbuilt
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Solution for Atwood Surge Brake Coupler Needing Replacement Parts
- Article: Pintle-Hitches
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Does The etrailer Invisible Base Plate Kit # e86YR Need An Adapter For A Blue Ox Aventa II Tow Bar
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Factory Brake Wiring Harness Location on 2012 Chevy Silverado
- Q&A: Replacement Key Needed for Gorilla Guard Trailer Coupler Lock
- Q&A: Replacement Conversion Kit For Motor For # 781005
- Article: Trailer Wiring Diagrams
- Article: Big Truck Big RV
- Q&A: Trailer Hitch And Wiring For A 2022 Honda CR-V Touring Hybrid With Hands Free Liftgate
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)