WiCurt Trailer Hitch, # 13342, Fit On 2010 Mercedes ML350 And What Wiring Harness Is Used
Question:
We have a 2010 ML350, want to ensure fit, and see about installation. We bought another hitch from you guys and you had the install instructions posted, do you have them for this hitch? The web page says see dealer for assistance with harness installation, does this mean I cannot do the wiring? does it come with wiring harness and instructions?
asked by: Alan L
Expert Reply:
Yes, I do have the installation instructions for the Curt Trailer Hitch, # 13342, for the 2010 Mercedes ML350. I am sending a link to the instructions.
This hitch will not fit a 2010 Mercedes ML350 with the air suspension package.
The car dealer will have to do the trailer wiring harness. Mercedes does not allow any company to make a wiring harness for the M-Class vehicles.
If you are towing with the hitch you will also need the Curt Ball Mount, # C45010, Pin and Clip, # PC3, and the hitch ball. The hitch ball size will depend on the coupler size of the trailer you will be towing. You will need either the 2 inch ball, # 19247, or the 1-7/8 inch ball, # 19260.
![Jeff D](https://images.etrailer.com/static/images/catg/people/338_tn.jpg)
Products Referenced in This Question
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Is a Transmission Cooler Required to Tow with a 2010 Mercedes ML350
- Article: Transmission Cooler
- Q&A: Troubleshooting 7-Way on Mercedes ML-350 Where Trailer Lights Dont Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Draw-Tite Sportframe Hitch # 24857 Recommendation for a 2011 BMW 328i Sedan
- Q&A: Dimensions Of The TorkLift SuperHitch Magnum Trailer Hitch Receiver # TL74FR
- Article: Trailer Hitch Installation Tips
- Q&A: Diagnosing Overload Warning, No Brakes, On a Tekonsha Prodigy P3 Brake Controller
- Q&A: Trimming Trunk Pan Cover of 2010 Mercedes-Benz M Class to Install Curt # 13342
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Installation Instructions Link for Curt Trailer Hitch # 13342 for a 2009 Mercedes ML350
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)