Which Hub/Drum Assembly Will Work With Timbren Axle-Less Assembly # ASR35HDS02
Question:
Which outer bearing does this use? 8-219-50UC3 is listed in the categories as having a 15123 outer bearing but in the description it says it uses a 14125A . If 8-219-50UC3 uses a 14125 then it can not fit a Timbren ASR35HD02. There is either an error in your categories or the description.
asked by: Bill
Expert Reply:
The Dexter Trailer Hub/Drum Assembly, part # 8-219-50UC3 has part # 14125A outer bearing included and does not have the # 15123. This assembly is designed for 5,200-lb, 6,000-lb, and 7,000-lb axles, and will work with 12 inch x 2 inch electric and hydraulic brake assemblies. This also has an 8 on 6-1/2 bolt pattern. None of the hub and drum assemblies we offer with an 8 on 6-1/2 bolt pattern use a 15123 outer bearing.
The Timbren Heavy-Duty Axle-Less Trailer Suspension, part # ASR35HDS02 has a 3,500 lb weight capacity and has a 4 inch lift for additional ground clearance. This system has the EZ Lube feature that makes it easy to grease the bearings without having to remove the hub.
A galvanized hub/drum assembly that will work with the Timbren system is part # 8-201-51UC3-EZ. This assembly has a 6 on 5-1/2 bolt pattern and uses the 15123 outer bearing.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Dexter Trailer Hub and Drum Assembly - 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Correct Bearing Kit for 2019 Jayco North Point 315RLTS
- Article: Most Popular Wheel Bearings
- Q&A: Looking For Bearing Kit For 2017 Jayco Northpoint With Lippert 7K Axles
- Q&A: Bearing Kit For A 2021 Winnebago Voyage 3235RL With Dexter 5,200 lb Axles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Lippert 5200lb Axle Hub Grease Seal Recommendation
- Q&A: Do Hub Races Have to Be Replaced Each Time Bearings Are Changed
- Q&A: What is Better, TruRyde or Timken Trailer Bearings
- Q&A: Correct Bearing Kit for Dexter Axle 5,200 lb Trailer Axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: The Best Boat Bumpers
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Article: Measuring a Trailer Tire