Brake Assemblies and Hub/Rotors for a AL-KO 6k Torsion Axle

Question:

Hi, I am looking for complete brake assembly for a horse trailer electric assbly and out hub and drum assbly. The axles are torsion: AL-KO H600, 6,000b, 6 on 5.5 Could you send me p/ns for both axles, LH and RH? Thanks,

asked by: Zach W

Expert Reply:

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. Since you said you have a 6 on 5-1/2 inch bolt pattern that narrows down the results.

Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.

If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs we offer that have 6 on 5-1/2 inch bolt pattern 6k hubs.

Most likely the part # AKHD-655-6-K would be the correct hub you would need. If you have an inner bearing of 25580 and an outer bearing of 15123 this would be the correct one. For a brake assembly you would want the part # 23-105-09 for the right hand side and # 23-106-09 for the left hand side.

expert reply by: Jameson C