Looking for STL201 Series GloLight 4 Inch LED Flange Mount Combination Stop/Turn/Tail/Back-Up Lights

Question

Question:

I am interested in the Optronics line of fusion tail lights and wanted to see if you were able to get a model that you do not currently have listed on your website. The model number is STL201RFMB. Thanks in advance I have used Optronics lights from you guys for all my custom projects and have had great results, I hope to get these for something I am working on now.

asked by: Brice E

0

Expert Reply:

I have exactly what you are looking for, # STL201RFMB. This light is DOT-compliant, offers sonically sealed weathertight connections, and has a recessed flange mount design for secure installation.

expert reply by: Leah S

0

click to enlarge

Answer 1

I went out to the warehouse and pulled the Optronics #STL201RFMB light to test it out and see for you. I found that when you have the running lights on that the LED ring glows constantly. When you press the brake, the red LEDs and the red LED ring…

view full answer...

Answer 2

To install the GloLight LED Trailer Tail Light #STL201RFMB that you referenced you would need to have a 4.5 inch hole cut in the trailer. The light portion of the assembly is 4.5 inches which would recess into the hole and the flange has an outer…

view full answer...

Answer 3

The integrated factory trailer brake controllers (ITBC) in most newer trucks are electric over hydraulic (EOH) compatible. Therefore you should be able to use one like the Titan BrakeRite EHB Electric-Hydraulic Actuator for Disc Brakes on a 2020…

view full answer...

Answer 4

The king pin dimensions can be the same between fifth wheel trailers and large commercial trailers. Both types of trailers often use a standard 2 inch king pin although semis sometimes have a 3-1/2 inch. As long as your truck fits a 2 inch king pin…

view full answer...

Answer 5

I have included a link to a video on adjusting self-adjusting brakes. Basically there is a device on the adjustment wheel on these brakes that prevents the shoes from adjusting back inward. You have to sort of move that out of the way to be able to…

view full answer...

Answer 6

I have attached for you below a dimensional drawing of the Square Corner Hinge with Reverse Bracket part #PLR2212-SSP provided from the manufacturer. This is the only dimensional drawing we offer for this product but if there is something else you…

view full answer...

Answer 7

Since the Fusion GloLight Tail Light part #OPT64WR is designed to be a trailer light and not a vehicle light it does not have any resistors integrated into it. Trailer wiring does not require this because the signal comes from the vehicle wiring…

view full answer...

Answer 8

There's no reason you couldn't run a Optronics Trailer Lights #STL8RB on both sides of your trailer.

view full answer...

Looking for STL201 Series GloLight 4 Inch LED Flange Mount Combination Stop/Turn/Tail/Back-Up Lights

Product Page this Question was Asked From

Continue Researching