Trailer Hitch Recommendation for a 2015 Dodge Durango
Question:
Does anyone have a Draw-Tite installed on a 2015 Durango Limited? The other question is on the V6 what is a factory installed tow package?
asked by: Greg
Expert Reply:
The Draw-Tite that has been confirmed as a fit for your 2015 Dodge Durango would be the part # 75713. I attached an install video that shows it being installed on a similar 2014 Durango. The process would be the same.
Typically a tow package for a vehicle includes a trailer hitch, trailer wiring, and sometimes a larger transmission cooler. Since your vehicle is pretty new you can check the original window sticker to see if the tow package was on your vehicle. Or you can call a Dodge dealer with your VIN.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
For trailer wiring you would want the part # 118617. Install video attached for this as well.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 900 lbs TW
- 6000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 900 lbs TW
- 6000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Best Hidden Trailer Hitch Recommendation for 2019 Dodge Durango
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: How Many Bolster And Swivel Brackets Are Needed For A Boat Trailer
- Q&A: Size of Factory Bolts For Installation of Curt Trailer Hitch Receiver in Factory Weldnuts
- Q&A: Trailer Fuse Locations on 2017 Ford Expedition
- Q&A: Does Rear Bumper Panel of 2018 Dodge Durango Install After Draw Tite Hitch # DT38MR Installs
- Q&A: What is a Concealed Cross Tube Trailer Hitch
- Article: Determining Trailer Tongue Weight
- Article: Top Gifts for Dads in 2024
- Article: 2023 Best Gifts for Boaters & Fishing Enthusiasts
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: My Trailer Hitch Doesn't Fit