Depth Of Lippert Screen Door Slider Panel

Question

Question:

What is the depth of this slider? I purchased one but the depth was about 1” and it hit the handle. I need one with a depth of about 1.5”.

asked by: Chris D

0

Expert Reply:

I spoke to my contact at Lippert about the depth of the Lippert Motor Home Entry Screen Door Bubble Slider Panel # LC234101. She informed me that the depth of the bubble slider panel is 13/16. From the furthest point out to the back measures approximately 1-3/16 inches.

I have attached a diagram with the measurement on it for you.

expert reply by: Victoria B

0

click to enlarge

Answer 1

Yes, there can be issues with UV damage and RV parts. It is due to the materials they are made from. They have to be made of strong materials but those materials get weakened with UV materials added. So it is kind of a Catch 22. We have the Lippert…

view full answer...

Answer 2

The Lippert Components Motor Home Entry Screen Door Bubble Slider Panel - Frosted #LC234101 is designed to work with the Lippert Components RV Entry Screen Door Latch - RH #LC201471.

view full answer...

Answer 3

The Screen Door Stop Handle - 12" - White Item #37211135 will work with the Lippert Motor Home Entry Screen Door Bubble Slider Panel - Frosted Item #LC234101 by screwing into it into your screen door using the three mounting holes.

view full answer...

Answer 4

The screen door slide you selected, Valterra #A77022, and all other options are shown on the linked page. In the specific size of this slide, 11-11/16 x 11-7/8-inches, all items are from Valterra and will have the same thickness dimension. Lippert 12…

view full answer...

Answer 5

Hey Josh, If your 2017 Ford Escape has a tow package then you'll see a 7-pin round connector around the trailer hitch to plug the Hopkins #30955 in. If you don't have this package/connector then you'll need the Tekonsha T-One Vehicle…

view full answer...

Answer 6

The great thing about these sliders like the Lippert Components Bubble Slider #LC234101 , which is 12" x 12" is that they can be trimmed down as needed. In order to make any necessary changes to these sliders I would first make a test fit…

view full answer...

Answer 7

There is not a direct replacement for your series 6300A model 6325 power converter. The 25 amp converter with 12V power can be replaced with the Progressive Dynamics Inteli-Power RV Converter and Battery Charger - 12V - 30 Amps #PD9130 which will…

view full answer...

Answer 8

Yes. The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375 lbs - Black Bracket #TLA7834 can be removed from the bracket by detaching the pull pins like the #TLA7804-8000. The main issue you might have is that the bracket…

view full answer...

Answer 9

I recommend using the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 4 Steps - 20" Wide - 375 lbs #TLA7804-8000. These are a 4 step system that has glow tape on the steps to help with visibility at night, and the adjustable landing…

view full answer...

Answer 10

The big difference is that the part #TLA7804-8000 does not come with a bracket for how it attaches to the truck whereas the part #TLA7834 does. The bracket is for a more permanent install where they'd fold up and store on the vehicle whereas…

view full answer...

Answer 11

While we do not carry any custom-fitted hitch receivers that will fit your Keystone Raptor toy hauler, we do have universal fits that will. For the best route, I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide…

view full answer...

Answer 12

It sounds like you are talking about door slider #LC234101. This is the only 12 x 12 inch Lippert door slider we have. It isn't all that clear though; it is considered frosted.

view full answer...

Depth Of Lippert Screen Door Slider Panel

Product Page this Question was Asked From

Continue Researching