Can You Align the Timbren Axle-Less Systems
Question:
Im looking to replace the AL-KO axle on my 2003 Scamp 16foot trailer. It is welded to the frame and has no adjustments for alignment purposes. Consequently, uneven tire wear has been an issue with it even though I had a specialty shop align bend it. Id like to gain about 3inch lift from a replacement axle, so I can use larger wheels presently has 13 and achieve greater ground clearance for the off-road travel we do. I think this kit will do the job, but Id like to know what alignment adjustments can be made to it once installed. Does it have cam-type washers like on my Xterra or what? Thanks.
asked by: Pete N
Helpful Expert Reply:
I spoke to my contact at Timbren and he said that their Axle-Less systems like the part # A35RS545E that you referenced does have the ability to be aligned. It comes with shims that allow you to make small alignment adjustments.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Continue Researching
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Search Results: bearing packer
- Search Results: 023 459 00
- Q&A: Brake Shoe Thickness and When to Replace Dexter 3,500 Brake Pads
- Q&A: Replacement Bearing Kit For Dexter 6,000 lb Axle
- Q&A: Can Built-In Camber be Adjusted on Timbren Axle-Less Trailer Suspension System with Hubs
- Shop: Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Q&A: Do the Timbren Axle Less Systems Have a Camber When Installed
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation
- Search Results: wheels
- Search Results: 3000 lb axle spring
- Shop: Suspension Enhancement
- Q&A: Comparing Trailer Tires that Have R and D in the Size, Radial vs. Bias-Ply
- Q&A: Can Timbren Axle Less Suspension System Install on C-Channel Trailer Frame
- Q&A: Purpose of Shims that Come with Timbren Suspension Enhancement System # TFR350SDJ
- Article: What is an RV-Approved Bike Rack? (And Do You REALLY Need One?)
- Search Results: shim kit
- Search Results: fender
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt - 2K
- Search Results: timbren
- Video: etrailer Round Swivel Marine Jack with Wheel Review MJ-1206B
- Shop: etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1,000 lbs
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 2" Lift - 5 Bolt - 3.5K
- Shop: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Shop: Front Mount Hitch