Trailer Hub that Uses Inner Bearing LM67048 and Outer Bearing LM11949
Question:
The hub i have now is a 5 lug with no numbers on the hub, the bearing numbers are LM67048 for inner bearing, LM11949 outer bearing, could you help me with what hub would be the best fit? I believe the hub thats on it is agriculture hub, i would like hub i can use for everyday use, not agricultural. Thank you
asked by: Alex
Expert Reply:
Sounds like you may have an older setup. If so you may need breaks and drums. All of the drums we carry for 3500 lbs axles are going to be 2 " deep. To get the correct drum we will need the bearing numbers and the spindle dimensions or we cannot guarantee that the drum assembly will fit.
If you can provide that information we will be glad to make a recommendation.
![Chris O](https://images.etrailer.com/static/images/catg/people/632_tn.jpg)
Products Referenced in This Question
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM67048
- LM11949
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Most Popular Wheel Bearings
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: How to Measure a Trailer Axle
- Q&A: 4 Lug Hub Replacement for Hub Marked BT100
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
- Article: Trailer Lighting Requirements
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Tell the Weight Rating of a Trailer Axle
Chris O.
7/24/2015
The only hub we have that takes inner bearing LM67048 and outer bearing LM11949 is agricultural hub # AH15450ECOMP. This hub has a 4 on 5 bolt pattern. If you used it you would have to change the wheels to match but 4 on 5 wheels are rare and we do not carry them. Please note that agricultural hubs are rated for a maximum of 20 miles per hour.