Troubleshooting No Trailer Running Lights Circuit on Factory Wiring 4-Way
Question:
Everything works except running light checked the power pronge on the truck and theres no power . My trailer hitch and trailer connectors are all factory installed
asked by: Marvin S
0
Expert Reply:
Since your trailer wiring is factory wiring it sounds like you blew a fuse for the trailer running lights circuit and that is why it no longer is functioning. Check the fuse box under the hood of your truck for the trailer wiring fuses and replace as necessary. You can also check relays if the fuses look good.
I attached a help article on trailer wiring for you to check out as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed For Flat Towing a 2024 Ford Maverick Behind a 2010 Winnebago Journey With Air Brakes
- Q&A: Caliper Bolts for AL-KO/Hayes Disc Brake Caliper BP18-050
- Q&A: Replacement Oil Seal for AL-KO 568303
- Q&A: Does The Progressive Dynamics PD4655V Have A Lithium Jumper
- Q&A: Which Instructions Are Used Installing a Roadmaster Brake-Lite Relay in a Ford F-150 w/ Neutral Tow
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Diode for Charging Line From Motorhome to Towed Vehicle (Toad)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Q&A: What Gauge Wire does 4-Way Trailer Wiring Use
- Article: Trailer Tire Sizing
- Article: Flat Towing Package for 2014-2015 Chevrolet Equinox