4-Way Trailer Wiring Harness has 5 Wires Coming Out of It on 2001 Pontiac Aztek
Question:
I need to add a connector onto my car hitch to pull a cargo trailer. I bought the connector. But the car hitch has 5 wires and the connector has 4. What do I do?
asked by: Brooke
0
Expert Reply:
It would be very unusual for your vehicle to have a 5 way pin connector at the rear of your Aztec. It sounds like you have a wishbone harness. A wishbone harness has 5 wires and 4 pins like a regular 4-Way but where the wires come out the running light circuit is split so you do not have to run a jumper wire between tail lights.
The wishbone harness will work with your trailer's 4 way connector.
expert reply by:
Chris O
0
Product Page this Question was Asked From
Mighty Cord Trailer Connector Adapter - 4-Way Flat to 6-Way Round - 12" Long
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 4 Flat
- Plug and Lead
- 6 Round
- Mighty Cord
more information >
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: Tow Bar Lighting Solution for 2023 Jeep Wrangler that Allows Charge for Battery
- Q&A: Best Stabilizers To Replace Scissor Style Jacks On 2019 Rockwood 2109RS That Rusted
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Q&A: How to Add 7-Way Wiring on a 2021 Ford Bronco
- Article: Must-Have Flat Towing Components
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: Performance Chips and Modules
- Q&A: Does Installing A Wiring Harness On A 2021 Jeep Wrangler JL Require A Wire Run To The Battery?
- Q&A: Parts Needed to Flat Tow a 2011 Ford Escape Behind a Motorhome
- Q&A: Can Tow Loops be Used In Place of the Blue Ox Base Plate Kit # BX1133
- Q&A: When Flat Towing a Vehicle How Much Tongue Weight is on the Trailer Hitch