Availability of 1-1/16 Inch Bearing Kit
Question:
I think i need: you will need the part # 500 1 1/16” bearing kit, thanks and have a bless day. However I dont see them enumerated on your site - HELP! THANKS!
asked by: Roy B
Helpful Expert Reply:
The easiest way to determine the correct bearings for your trailer is to use the industry standard numbers stamped into the lip of the bearings (see image). This would require removal of the hub. If 1-1/16 inches is your bearing measurement, that comes to 1.0625 inches. The inside diameter of the, # L44649, bearing is 1.063 inches which would be a close match. This bearing is usually mated with the same bearing on the inner race or with, # L68149, bearing for an inner bearing. You will need to know what each bearing size is to order replacements.
The Bearing Kit for #84 Spindle, # BK2-100, may be the correct fit but we will need to check the existing parts to be sure. I have included a link to a video showing how to remove, inspect, and replace bearings that might help.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels