Bearing Kit for Dexter Trailer Axle with Standard Spindles
Question:
What bearing kit is required for axle T20BTR-7258?
asked by: Todd P
Expert Reply:
The bearing kit that fits the Dexter trailer axle # T20BTR-7258 is part # BK1-150. This includes two bearings, two races, a 10-60 seal, EZ Lube spindle washer, and cotter pin.
The bearings included in this kit are a match for the inner and outer bearings for the # T20BTR-7258 axle.
You will want to make sure that the races and seal will fit inside the hub you will be using. The seal has an outer diameter of 1.987 inches and the races have an outer diameter of 1.980 inches.
If you do not already have hubs for your axle, I recommend the Dexter Trailer Hub Assembly # 8-91-05UC1-EZ for 4 on 4 bolt pattern. For a 5 on 4-1/2 bolt pattern, I recommend Dexter Trailer Hub Assembly # 8-258-5UC1-EZ.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Leaf Spring and Hanger Kit Recommendation for 7k Triple Axle
- Q&A: Could Shackle Bolt # 166081 be Used with CE Smith Suspension Hanger # CE14016G
- Q&A: Can Trailer Spindle be Bent Back In Place
- Q&A: How to Check for a Bent Trailer Axle Spindle
- Article: How to Measure a Trailer Axle
- Q&A: Recommended Pop & Lock Tailgate Lock For A 2015 Toyota Tacoma With Tailgate Camera
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Where to Position the Trailer Axle?
- Q&A: Is 4 on 4" Bolt Pattern the Same Size as 4 on 100mm Bolt Pattern
- Q&A: Compatibility of Pop & Lock Tailgate Lock System with Factory Backup Camera
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne