Recommended Parts To Convert Drum To Disc Brakes On EZLoader Trailer With 3,500 Lb Axle
Question:
I am looking for drum to disk conversion kit. 1997 ezloader 14 foot wheel and 5 lug nuts
asked by: Eric B
Helpful Expert Reply:
To convert your EZLoader trailer to disc brakes you will need a couple things.
I called my contact at EZLoader and with the VIN you supplied they told me you have a 3,500 lb axle on your trailer and they told me what size bearings your trailer uses. To convert your trailer to disc brakes I recommend the Kodiak Disc Brake Kit, part # K2HR35D. This is designed for wheels 13 inches and larger with a 5 on 4-1/2 bolt pattern, and with a 4-bolt brake mounting flange.
The inner bearing has an inner diameter of 1.378 inches and the inner diameter of the outer bearing measures 1.063 inches. If any of these dimensions do not match the components you have on your trailer, you can check out the attached helpful article that explains what is needed and how you can measure the spindle on your trailer to make sure you get the right parts.
This disc kit includes 2 full brake assemblies needed to convert your brakes. The only added part you need is part # BH-3MFS-1. These are flexible lines that allow the calipers on the disc brakes to move freely when used.
Products Referenced in This Question
Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 1'
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 1 Foot Long
- Brake Lines
- Flexible Brake Hose
- Brake Line Components
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Continue Researching
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Search Results: 18140
- Search Results: n40975
- Search Results: relay
- Search Results: trailer drop axle
- Shop: Americana Trailer Wheel Lug Nut - Chrome Plated - 1/2"-20
- Search Results: marine electric brakes
- Shop: Mounting Hardware for 10" Brake Assemblies
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,500 lbs
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Curt Relay Kit for Nissan Armada or Titan Aftermarket Tow Package
- Search Results: trailer electric brake hub assembly
- Search Results: electric brake controller
- Q&A: Recommended Parts To Convert Hydraulic Drum To Disc Brakes On EZ-Loader Trailer
- Q&A: How To Pick Out Disc Brake Kit for an EZ Loader Boat Trailer
- Q&A: Difference Between E-Coat and Dacromet on Trailer Brake Kit
- Q&A: How to Convert Drum Brakes to Disc Brakes on a 2005 Boat Trailer
- Q&A: Disc Brakes for 2004 EZ Loader 3500 Pounds Trailer
- Q&A: Converting EZ Loader Tandem Axle Aluminum Boat Trailer to Disc Brakes