Weight Distribution Recommendation for a Toyota 4Runner Towing Light Camper
Question:
Looking for a wt. distribution hitch for my 2006 4Runner to a 3,100lb ultra light camp Trailer single axel, TW about 340lbs. 4 Runner has factory hitch. Trailer with 2 inch ball. Current sag at the rear bumper is about 2 inches under tow, with new KYB shocks.
asked by: Jerry N
Helpful Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
If your tongue weight is right at 340 lbs a system like the part # RP66082 would work great for you. It has a tongue weight range of 200-600 lbs and features the only sway control on the market that works to prevent sway before it starts.
For a 2 inch ball you would want the part # A-90.
Products Referenced in This Question
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >