Is Titan Electric Over Hydraulic Disc Brake Kit Compatible with 2013 Ford F-150
Question:
1 What other components will i need or is this kit # T4843800 compatible? 2 Are the brake lines stainless or coated against corrosion? 3 Application is on a Nations 26foot tandem axle boat trailer. 4 What size rim hole is needed on the 14inch wheels to fit over this rotor or is there only a standard size for the 4-1/2inch bolt pattern size?
asked by: Mac
Helpful Expert Reply:
First, if your 2013 Ford F-150 has the factory integrated brake controller you will need adapter # T4845900 for the electric over hydraulic disc brake kit # T4843800 to work. Or if you have an aftermarket brake controller it will have to be compatible with electric over hydraulic systems. If you do not have a brake controller then for a compatible one I recommend the P2, # 90885, with wiring harness # 22292.
The brake lines are steel and not coated. Must 14 inch trailer wheels have a 3.19 to 3.27 inch diameter pilot hole and those will work with the rotors in the kit. I have linked a help article on adding electric over hydraulic disc brakes to a trailer for you.
![Michael H](https://images.etrailer.com/static/images/catg/people/324_tn.jpg)
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Dexter BrakeRite SD Adapter for Ford/Chevy Integral Brake Controllers
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Adapters
- Dexter
more information >