Trailer Hitch and Wiring for a 2015 Jeep Renegade
Question:
I think I have found the two rear bolts to bolt hitch to. where are the front two located? on front end of car
asked by: Mike S
Helpful Expert Reply:
There should be 2 holes per side on the back frame rails on your 2015 Jeep Renegade. They will be covered with rubber covers (rear 2 holes) and plastic plugs (forward 2 holes). For the forward 2 holes you will need a T25 bit to remove them from the frame. I have linked the instructions for Curt trailer hitch # C13269 for you.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
For trailer wiring use # 118651.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Installation Instructions for Bulldog Powered-Drive Kit # BD1824200100
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: Replacement Trailer Hub/Drum for Part Number 2420801
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Size of Factory Bolts For Installation of Curt Trailer Hitch Receiver in Factory Weldnuts
- Q&A: Lug Nut Torque for a Trailer Wheel
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Replacing a Dometic Sealand 210 With Dometic Full-Timer 510H
- Q&A: Repair Kit Fulton Wedge-Latch # F670801, Fits Fulton/Bulldog Couplers for 2-5/16 Inch Balls
- Article: Harvest Hosts
- Article: Trailer Maintenance Schedule
- Article: Flat Towing Package for 2014-2018 Jeep Grand Cherokee
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Article: Rooftop Cargo Carriers