Recommended Hitch Cargo Carrier for Use on Front Hitch # C31023 on GMC Sierra 2500HD

Question

Question:

Just installed front mount receiver on my GMC 2500 hd and would like recommendation on cargo carrier. Will be carrying a honda 2000 gen. and gas can, etc.

asked by: William B

0

Expert Reply:

Thank you for your recent purchase of Curt front-mount hitch receiver # C31023 for your Sierra 2500HD. This 2-inch hitch offers a maximum tongue weight (TW) capacity of 500-lbs so a cargo carrier rated for 450-500-lbs will be a good choice. Please click on the link provided to see all fixed cargo carriers in this capacity range.

I suggest a lightweight aluminum carrier like the Curt # C18113 because it weighs only 25-lbs and this will leave more of your hitch capacity for your cargo. Plus this will help reduce compression of your front suspension.

You will want to ensure your total cargo load does not exceed the available 475-lb cargo weight, which is hitch capacity minus carrier weight (500 - 25 = 475-lbs). Also it is a good idea to make sure your items do not block air flow to the engine or block your headlights. I also suggest you check local laws regarding transporting gasoline on the front of a vehicle.

expert reply by: Adam R

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 3

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350…

view full answer...

Answer 4

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 5

I measured the distance of the hitch pin hole to the front of the Curt Cargo Carrier for 2" Hitches #C18113 and found it was 29 inches from the center of the hitch pin hole to the furthest part (the front) of the carrier, as you can see in the…

view full answer...

Answer 6

The Curt Cargo Carrier #C18113 will definitely work with the etrailer #e25TR on your 2024 Outback. Keep in mind, you will be limited to the 350 lb max tongue weight of the hitch or the max tongue weight of your vehicle. Whichever is lower is what you…

view full answer...

Answer 7

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

view full answer...