Is the Optronics Trailer Light # ST45RB 12 or 24 Volt
Question:
are these 12 volts or 24 volts lights?
asked by: Harry
Expert Reply:
The Sealed, 4 inch Round Trailer Stop, Turn and Tail Light, part # ST45RB is designed to work with a 12 V system. I have attached a product review video for this light you can check out.
This light accepts the 3-prong connector like part # A45PB. The grommet used with this light is part # A45GB and is sold separately.
For a 4 inch light that is designed for a 24 volt system I recommend part # STL23R24B.
Products Referenced in This Question
Rubber Grommet for 4" Round Trailer Lights - PVC
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- 4 Inch Diameter
- Grommet
- Round
- Optronics
more information >
3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- 10 Inch Long
- Three Wire
- Straight Pigtail
- Optronics
more information >
Miro-Flex LED Trailer Tail Light - Stop/Turn/Tail - Submersible - 12 Diodes - Round - Red Lens - 24V
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 4-5/16 Inch Diameter
- Red
- Optronics
more information >
Product Page this Question was Asked From
Optronics Trailer Tail Light - Stop, Turn, Tail - Submersible - Incandescent - Round - Red Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Round
- Recessed Mount
- Submersible Lights
- Incandescent Light
- 4-1/4 Inch Diameter
- Red
- Optronics
more information >
Continue Researching
- Q&A: Replacement LED Trailer Tail Lights for a 2005 Gulfstream BT Cruiser
- Shop: Optronics Trailer Tail Light - Stop, Turn, Tail - Submersible - Incandescent - Round - Red Lens
- Shop: Rubber Grommet for 4" Round Trailer Lights - PVC
- Shop: Peterson Trailer Tail Light w/ Grommet and Plug - Stop, Turn, Tail - Incandescent - Round - Red Lens
- Article: Top Gifts for Dads in 2024
- Q&A: Replacement Master Cylinder And Shock For UFP A-60 / A-75 / XR-84 Surge Brake Actuators
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Measuring a Trailer Tire
- Article: Printable Trailer Bolt Hole Pattern Template
- Q&A: Is a Gap on Either End of Cross Tube Acceptable for Draw-Tite Hitch Installation on 2023 F-150
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: Installation Instructions for Curt Class II Hitch # C12108
- Q&A: Spout Diameter of Camco Replacement RV Fresh-Water Spout Item # CAM37102
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop